Waste Nylon Polyester Film Silk and Cloth Strengthen Agglomerator Machine
Application Areas:
PNAG strengthen series high-speed pelletizer is a kind of equipment that directly recycles and pelletizes waste PA (commonly known as nylon) and PET (commonly known as polyester) film, silk, and cloth.
Working Principle
After the waste material is put into the machine pot, the material is quickly cut into pieces by the shearing action of the high-speed rotating blade and the fixed blade. The chopped materials or pieces flow along the inner wall of the pot under the action of the centrifugal force of the rotary cutter disk, and at the same time, the materials are turned up and down under the action of the paddle, moving from the surrounding to the center of the pot. Due to the friction between the material itself and the friction with the pot wall and the blade at high speed, a large amount of frictional heat is generated, so that the temperature of the material rises rapidly to a semi-plasticized state, and adheres to each other into small pieces. Before the material is about to agglomerate, spray all the pre-prepared quantitative water into the material. When the cold water meets the hot material, it vaporizes quickly and takes away the heat from the surface of the material, so that the surface of the material is rapidly cooled to prevent agglomeration, and then passed through The crushing action between the blade and the fixed blade causes it to be shredded into granules (irregular and irregular granules). In the shredding process, appropriate pigments can be added for coloring as needed. The pellets produced by this machine can be directly used by extruders and injection molding machines. For products with strict requirements, they can also be pelletized by the extrusion granulator before use. The pot body material of the PNAG series agglomerator is stainless steel, and the blade material is T7.
Features:
PA (nylon) and PET (polyester) membranes, silks, and cloths are relatively strong and have a high melting temperature, so the motor and the wall must be strengthened and thickened. Our product is designed to deal with materials with high melting temperatures and high strength.
Technical Parameters:
| Model |
PNAG-100S |
PNAG-300S |
PNAG-400S |
PNAG-500S |
| Spindle speed (r/min) |
1050 |
950 |
850 |
750 |
| Output (kg/h) |
150-200 |
300-400 |
400-500 |
600-800 |
| Motor power (kw) |
55 |
90 |
110 |
160 |
| Voltage (V) |
380 |
380 |
380 |
380 |
| Volume (L) |
100 |
300 |
400 |
500 |
| Weight (kg) |
1100 |
1900 |
2000 |
3000 |
| Dimensions (m) |
1.7*0.75*1.5 |
2*0.85*1.6 |
2*0.85*1.6 |
2.3*0.95*1.7 |
| Number of moving knives (pieces) |
2 |
4 |
4 |
4 |
| Number of fixed knives (pieces) |
6 |
8 |
6-8 |
6-8 |
| Lubrication method |
Grease lubrication |
Pressure lubrication |
Pressure lubrication |
Pressure lubrication |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}