Good Quality Waste Car Engine/ Cardboard/ Mainboard/ Laptops Single Shaft Shredder Machine
Application Areas:
The single-shaft shredder is used to recycle plastic, paper, wood, fiber, cable, rubber, home appliance, light steel, municipal solid waste, etc. It is ideally suited for the reduction of a wide range of different materials:
1.Refuse-derived fuel: straw, municipal solid waste;
2.Textile: cloth fiber, nylon;
3.Paper: industrial waste paper, packing paper, cardboard paper;
4.Cable wires: copper core cable, aluminum cable, composite cables;
5.Polypropylene pipe, industrial packaging & plastic films, PP woven bags;
6.Plastic: plastic block, plastic sheets, PET bottle, plastics pipe, plastic container, plastic drums, plastic film,woven bag, plastic barrels, plastic boards.
7.Hand Plastic:plastic lump(purgings), fiber, high strength engineering plastic(ABS, PC and etc)
8.Wood:timber, tree root,wood pallets
9.Light Metal: aluminum can, aluminum scrap
10.White Goods: TV Shell, washing machine shell,refrigerator body shell, circuit boards
11.Solid Waste: MSW, RDF,Medical waste,industrial waste.
12.Other: rubber, textile, fiber& glass products.
Description:
Single shaft shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper etc. The cutter head is consists of basic shaft and pieces of quadrangle cutter. There are four edges which are easy to change. 'V' shaped rotary cutters are fixed on single shaft. The fixed cutter is mounted at an angle in adjacent to rotary cutter to achieve better cutting. The material is grabbed between 'V'shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of 'V' shape rotor knives. Also the knives are very easy to install and remove.
Working principle:
The motor drives the shaft to make knife rotates in high speed, the material are put to between the knife shaft and fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, the oversize material will be send back for re shredding. The final product size can be adjusted by changing the final product size.
Key Features:
1.CE Certified: Safety devices in line with European CE Certification.
2.RAM: The hydraulic ram pushes material against the rotor.
3. Screen: Different screen size
4.Rotor: Various rotor configurations available for processing a wide range of materials.Blades are made from hardened DC53 steel,the blades can be turned 4 times before changing.
5.Shock absorber:Absorbs Vibrations caused by the shredding of the materials, This protects the machine and its various parts from demage.
6.Gear box:Water cooled gearbox guards against overloading. Hardened teeth on the reducer.
7.Bearing Seat:Protective bearing covers to avoid foreign contamination entering the bearing housing. Grease points to release oil at intervals to increase service life.
8.Hydraulic station:The ram pressure and timing can be adjusting to suit different materials. The machine can be fitted with wind cooled two-speed pump.
Rotor:
We can offer a variety of rotor configurations to suit different application:
1.High Performance Rotor:
The rotor is our standard rotor,suitable for processing a wide range of materials at high speed. Materials include plastic, wood, paper, fibre, cable and etc.
2.Hand Material Rotor:
The rotor is designed specifically for processing hard materials such as ABS,PC,Nylon and etc. The Blade holders are sub-set deeper into the shaft to reduce the impact on the blades and shaft.
3.Plastic Film Rotor: The rotor is designed specifically for processing films. Sub-set block blades in the shaft prevent film from wrapping around the rotor and hardox surface on the rotor protects the shaft against abrasion from sand and dirt.
Shredding Process:
1.The hydraulic ram pushes the material against the rotor at a pre-set speed.
2.The material is shredded by the rotor teeth.
3.The hydraulic ram maintains the pressure against the rotor, maximizing output of shredded materials.
Parameter:
Mode |
PNDS-600 |
PNDS-800 |
| Output |
300kg/hr |
600kg/hr |
| Driving part |
18.5KW or 22KW , hard tooth surface gear box |
37KW, hard tooth surface gearbox |
| Shredding part |
Fixed blade: 1pc, material: SKD-11
Rotating blade: 26pcs, material: SKD-11 |
Fixed blades:4 pcs in two groups, material: SKD-11
Rotating blades: 38 pcs,material:SKD-11
Cutter head:38pcs,material:45# forgings |
| Shredding cavity size |
400mm×600mm |
1300mm×800mm |
| Material pushing length & method |
600mm, parallel push material |
900mm,inclined feeding |
| Rotate speed |
82r/min |
| Principle axis |
Rotating range: 260mm
Working length: 600mm |
Rotating range:420mm
Working length:800mm |
| Hydraulic system |
Oil pump motor: 2.2kw,
MAX working pressure: 10MPa
Gear pump
Oil cooling method: water |
oil pump motor:4kw,
Max. working pressure:10MPa
Gear pump
Oil cooling method: water |
| Pushing part component |
Controlled by PLC
Max. feeding range protected by proximity switch |
| Electric part |
PLC: Mitsubishi Japan |
| Screen |
Screen diameter:50mm
Screen thickness:10mm
hydraulic cylinder diameter:80mm |
| Dimension(L*W*H) |
1900*1200*2000 |
2600*1700*2100 |
| Weight |
About 1500Kg |
Around 3500kg |
Customer Feedback:
Our Service
1. One year guarantee for whole machine.
2. 24 hours technical support.
3. Our engineers can provide service overseas. The service is free, but the charge of round air-tickets, food and hotel is to the customer's account.
4. After a year, we can instruct you how to maintain the machine, and spare parts are provided with the best price.
5. We also can provide training service which help operators handle the machine well.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}