| Warranty: | 1 Year |
|---|---|
| Type: | Plastic Pipe Crusher |
| Raw Material: | PVC |
| Structure: | Top Feed |
| Knife Classification: | Piece Knife Crusher |
| Knife Roll: | Solid Knife Roller |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 100-2000kg/H Waste Rubber Grinding Crusher Tire Recycling MachineApplications:
1. Tyre crushing machine is mainly used for crushing scrap rubber and waste tires. It is suitable for removing the mouth-ring steel wire and crushing truck tires, car radial tires, inner tires, rubber shoes, and other scrap waste rubber products that are in line with their feeding sizes. It is conducive to the waste recycling industry on old rubber coarse processing, reducing impact load noun construct of the crusher, shredder in a reclaimed rubber plant, as well as improving the crushing efficiency.
2. The waste tire rubber crusher machinery can be used as a pretreatment device of a fully automatic continuous pyrolysis plant to process waste tires and waste rubber into fuel oil. The crusher can shred waste tires into rubber pieces of 30-50mm, which can improve the pyrolysis efficiency.
3. The rubber crushing machine is also used as a part of the rubber powder production line to produce rubber powder or rubber particles.
Description:
Tire crusher (also called rubber crusher, tire shredder) is a kind of equipment that can crush waste tires into rubber pieces under normal temperature. It mainly consists of tire hoisting machines, power systems, crushing knife groups, screening institutions, and so on.
Working principle:
The tire crushing machine adopts a horizontal structure, overall base, and stand-alone bearing, which is good for installation, commissioning and maintenance. The crushing of large waste rubber pieces is conducted in the crushing chamber of a rough crusher. The crushing is completed by the cutter mounted in two parallel shafts. The two axes are rotating relatively according to a certain ratio, and the waste rubber is crushed under the relative movement of the jaws. The crushed rubber pieces drop on the rotary screen. The pieces that are in line with the size requirement drop on the conveyor belt through the screen holes and then are sent out; the other pieces that are not standard return the crushing chamber along with the screen and then are crushed again. The cutter surface is processed specially, with advantages of high hardness, stiffness, and wear resistance. Transmission mode of crusher: the motor is decelerated by the pulleys; transmission and reducer two deceleration, and then drive the two spindle rotation.
Features :
1. Compact structure, reasonable layout, smooth operation, low energy consumption, high efficiency, convenient and simple installation, and maintenance.
2. The machine is equipped with two kinds of feeding devices available for customers to choose, large conveyor belt and small hoist feeding. The customers can choose according to the area of the plant. The cutting edge is made of special hard alloy material and processed by a special method, which has the advantages of long service life, high efficiency, advanced technology, and easy to replace…
3. Two options for the discharge screen: traditional round screen and high efficient shaft linkage start screen mesh. It is configured according to the customers' requirements.
Technical Parameters
|
Model |
Blades Fixed Rotating(psc)
|
Grinder Chamber Dimension(mm) |
Power(kw) |
Mesh(mm) |
|
|
PNGM-35/60 |
2×2 |
3×2 |
600×360 |
22-30 |
φ12-φ50 |
|
PNGM-42/08 |
2×2 |
3×2 |
800×420 |
30-45 |
φ12-φ50 |
|
PNGM-42/10 |
2×2 |
3×2 |
1000×420 |
37-55 |
φ12-φ100 |
|
PNGM-63/10 |
2×2 |
5×2 |
1000×630 |
55-110 |
φ12-φ100 |
|
PNGM-63/12 |
2×2 |
5×2 |
1200×630 |
75-132 |
φ12-φ100 |
|
PNGM-70/10 |
2×2 |
7×2 |
1000×700 |
75-132 |
φ12-φ100 |
|
PNGM-70/12 |
2×2 |
7×2 |
1000×700 |
90-160 |
φ14-φ100 |
Customer Feedback:
Company Information:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}